An assessment of the impact of abattoir effluent discharge on the water quality | Blazingprojects Postgraduate Thesis
Home / Civil engineering / An assessment of the impact of abattoir effluent discharge on the water quality

An assessment of the impact of abattoir effluent discharge on the water quality

 

Table Of Contents


Chapter ONE

INTRODUCTION

  • 1.1Introduction
  • 1.2Background of Study
  • 1.3Problem Statement
  • 1.4Objective of Study
  • 1.5Limitation of Study
  • 1.6Scope of Study
  • 1.7Significance of Study
  • 1.8Structure of the Research
  • 1.9Definition of Terms

Chapter TWO

LITERATURE REVIEW

  • 2.1Overview of Abattoir Effluent Discharge
  • 2.2Water Pollution and Quality
  • 2.3Environmental Impact of Abattoir Effluents
  • 2.4Regulatory Frameworks and Standards
  • 2.5Treatment Technologies for Abattoir Effluents
  • 2.6Case Studies on Abattoir Effluent Management
  • 2.7Effects on Aquatic Ecosystems
  • 2.8Human Health Impacts
  • 2.9Economic Implications
  • 2.10Sustainable Practices in Abattoir Operations

Chapter THREE

SYSTEM DESIGN AND IMPLEMENTATION

  • 3.1Research Design
  • 3.2Sampling Procedures
  • 3.3Data Collection Methods
  • 3.4Data Analysis Techniques
  • 3.5Ethical Considerations
  • 3.6Research Limitations
  • 3.7Study Population
  • 3.8Research Instrumentation

Chapter FOUR

SYSTEM TESTING AND EVALUATION

  • 4.1Overview of Research Findings
  • 4.2Analysis of Water Quality Parameters
  • 4.3Relationship between Effluent Discharge and Water Quality
  • 4.4Comparison with Regulatory Standards
  • 4.5Impact on Surrounding Environment
  • 4.6Stakeholder Perspectives
  • 4.7Recommendations for Mitigation
  • 4.8Future Research Directions

Chapter FIVE

SUMMARY, CONCLUSION AND RECOMMENDATIONS

  • 5.1Summary of Findings
  • 5.2Conclusions Drawn
  • 5.3Implications for Policy and Practice
  • 5.4Contributions to Existing Knowledge
  • 5.5Recommendations for Action

Thesis Abstract

This report presents results obtained from the investigation and water sampling exercise carried out on the segment of River Illo that passes through Sango in Ado Odo-Ota Local Government Area, Ogun State, Nigeria. The report reveals that while some people used water from the river for domestic, food production and recreation purposes, others discharge their wastes without any form of pre-treatment into it. The multipurpose usage of water from River Illo by local residents thus hinges public health on the self purification capacity of the river alone. Information on water use and waste disposal practices of the local residents were obtained through direct observation and oral interview of members of randomly chosen households built along the river within a distance of 2km. Single grab samples of water were obtained from the river at the site of an abattoir effluent discharge at distances 0m, 10m, 20m, 30m, 50m and 100m from the point of discharge. A seventh sample was also obtained 10m upstream of the point of effluent discharge to furnish information on ambient conditions of the river prior to pollution while an eighth sample which was prepared by diluting the water obtained at 0m with distilled water (i.e. 25% stream water, 75% distilled water) was included to serve as control sample. All water samples were transported (within 3 hours of isolating them from the river body) to the laboratory for analysis and the results were subjected to graphical, statistical and mathematical analysis. Pollution from the abattoir caused a drop in dissolved oxygen level of the river from an ambient value of 4.6mg/l to 0.01mg/l at the point of discharge. The pollution also caused an increase of 447.5mg/l to 1071.5mg/l in T.S., 0.04mg/l to 4.4mg/l in ammonia, 170mg/l to 670mg/l in BOD, 0.05mg/l to 3.05mg/l in phosphorus, 50mg/l to 1066.7mg/l in alkalinity and 18mg/l to 820mg/l in Acidity. It was also found out that between 30m ” 80m downstream of the pollution point, a threat of eutrophication is caused by plants growing in the river path. Despite this obstruction, the river recovered considerably to a D.O. level of 3.9mg/l at 100m downstream. Results from the dispersion modeling shows the self-purification capacity of the river, f, to be 1.1 within 30m distance from the point of discharge and 0.8 between 30m and 100m from the point of discharge. The results from the application of the Streeter-Phelps model showed that the eutrophication occurring between 30m ” 80m is interfering adversely with the self purification processes of the river. The percentage compliance of each of the eight water samples with Guideline Values (GLV) of WHO and FEPA was performed. None of the samples met the minimum requirements for BOD, COD and TSS, which are indicators of pollution. It was concluded that River Illo is being polluted by abattoir effluents discharge thereby exposing the health of local residents who use the water from the river for domestic, recreation and food production purposes to avoidable risks. Suggested actions that could further complement the self-purification capacity of the river were offered.

Thesis Overview

Blazingprojects Mobile App

📚 Over 50,000 Research Thesis
📱 100% Offline: No internet needed
📝 Over 98 Departments
🔍 Thesis-to-Journal Publication
🎓 Undergraduate/Postgraduate Thesis
📥 Instant Whatsapp/Email Delivery

Blazingprojects App

Related Research

Microbiology. 3 min read

A Framework for Predicting Antibiotic Resistance Development in Clinical Bacteria...

This research aims to develop a helpful framework that can predict how bacteria that cause infections in hospitals and clinics become resistant to antibiotics. ...

BP
Blazingprojects
Read more →
Medical Rehabilitati. 4 min read

A Framework for Patient-Centered Design in Remote Medical Rehabilitation Programs...

This research focuses on creating a practical framework to guide the design of remote medical rehabilitation programs that are centered around the needs and pre...

BP
Blazingprojects
Read more →
Medical Laboratory S. 3 min read

A Framework for Standardizing Quality Control Practices in Clinical Laboratory Testi...

This research focuses on developing a clear and practical framework to standardize quality control practices in clinical laboratory testing. Quality control in ...

BP
Blazingprojects
Read more →
Mechanical engineeri. 2 min read

A Framework for Parametric Modeling of Additive Manufacturing Mechanical Properties...

This research focuses on developing a systematic framework to model the mechanical properties of materials produced through additive manufacturing (AM), also kn...

BP
Blazingprojects
Read more →
Mathematics. 2 min read

A Framework for Modeling Nonlinear Dynamics in Chaotic Systems...

This research aims to develop a comprehensive framework for understanding and modeling nonlinear dynamics in chaotic systems. Chaotic systems are complex system...

BP
Blazingprojects
Read more →
Materials and Metall. 3 min read

A Framework for Predicting Corrosion Resistance in Aluminum Alloy Composites...

This research focuses on developing a structured way to predict how well aluminum alloy composites resist corrosion, which is a common challenge in many industr...

BP
Blazingprojects
Read more →
Mass communication. 3 min read

A Framework for Analyzing the Impact of Social Media Influencers on Youth Political ...

This research examines how social media influencers affect the way young people engage with politics. In recent years, social media influencers—individuals wi...

BP
Blazingprojects
Read more →
Marketing. 3 min read

A Framework for Integrating Social Media Engagement into Customer Loyalty Models...

This research explores how social media engagement influences customer loyalty, aiming to create a new framework that combines these two areas. Customer loyalty...

BP
Blazingprojects
Read more →
Linguistics. 2 min read

A Framework for Analyzing Code-Switching as a Pragmatic Competence...

This research is focused on understanding how people switch between languages or dialects in everyday conversation, a phenomenon known as code-switching. Specif...

BP
Blazingprojects
Read more →
WhatsApp Click here to chat with us