INTRODUCTION
LITERATURE REVIEW
RESEARCH METHODOLOGY
DATA PRESENTATION AND ANALYSIS
SUMMARY, CONCLUSION AND RECOMMENDATIONS
ABSTRACT
Biomass Briquetting can address waste problems, reduce air pollution from direct open air burning and also reduce dependence on fossil fuels for heat generation. Dry leaves have been shown to have high calorific values; therefore the purpose of this study is to determine the effects of some binders on the physical and combustion properties of dried leaves briquettes. Dried leaves were mixed with binders such as clay, starch and Arabic gum separately at different ratios of 10%, 20%, 30% and 40%, and made into briquettes using a manual press with a hydraulic jack of 20 tons. Physical and combustion properties of these briquettes were obtained using different methods prescribed by other researchers. From the results of the properties tested, briquettes made from dried leaves and gum at 40% of binder was most resistant to water. Dried leaves and clay at 40% had the highest relative density of 0.7977g/cm3. Dried leaves an.d starch had a relative density at 40%, 0.4640g/cm3 while briquettes with gum binder had 30%, 0.4030g/cm3. Dried leaves and gum at 40% had the highest volatile matter of 84.110% and the highest heating value of 30.5118MJ/kg at 10%. Briquettes at this ratio failed to hold, because of its low durability. The high ash content of briquettes bonded with clay 16.353% to 34.487% made it difficult to ignite, due to the presence of non combustible matter. Dried leaves bonded with starch at 20% had high heating value of 30.2189, and was able to withstand shattering with durability of 81.752% and high relaxation ratio of 1.7427. It can then be considered as the best binder in this study.
📚 Over 50,000 Research Thesis
📱 100% Offline: No internet needed
📝 Over 98 Departments
🔍 Thesis-to-Journal Publication
🎓 Undergraduate/Postgraduate Thesis
📥 Instant Whatsapp/Email Delivery
This research develops a unified framework that links pore-scale processes to field-scale reservoir performance, enabling more accurate forecasts of oil and gas...
This research explores how global leaders and major powers coordinate diplomatic behavior in a world where power is distributed among several influential region...
This research explores how catalytic processes in industry can be redesigned to support circular economy principles, reducing waste, conserving resources, and e...
This research explores how organizations can make HR practices more resilient and dynamic in the face of rapid changes such as technology disruption, demographi...
This research investigates how rural households connected to both farming and provincial markets build resilience to shocks and stresses. It addresses the gap b...
This research explores how isotopic signatures can be integrated into thermochronology studies of sedimentary basins to better understand their thermal historie...
This research explores how to build and apply a theoretical framework for evaluating the ethics of artificial intelligence (AI) used in business settings. It as...
The research topic explores how cities can manage the interconnected systems of water, energy, and waste more effectively by using a resilience-framing framewor...
This research explores a resilience-framing framework for urban environmental management systems, focusing on how cities plan for, respond to, and learn from en...