The use of rice husk powder in composites cement system | Blazingprojects Postgraduate Thesis
Home / Industrial chemistry / The use of rice husk powder in composites cement system

The use of rice husk powder in composites cement system

 

Table Of Contents


Chapter ONE

INTRODUCTION

  • …………………………………………………………………………. 1 Statement of the Problem ……………………………………………………………………………………. 2 Aim of the Research ………………………………………………………………………………………….. 3 Objectives ………………………………………………………………………………………………………… 3 Scope ……………………………………………………………………………………………………………………….. 3 Significance of the Research ……………………………………………………………………………….. 3 Delimitation of the Study. …………………………………………………………………………………… 3 Limitation of the Study. ……………………………………………………………………………………… 4 Research Questions/Hypothesis …………………………………………………………………………… 4 Basic Assumptions ……………………………………………………………………………………………. 4

Chapter TWO

LITERATURE REVIEW

  • ……………………………………………………………….. 5 Origin of Cement ………………………………………………………………………………………………. 5 Ceramics and Glasses ………………………………………………………………………………………… 6 Ordinary Portland Cements …………………………………………………………………………………. 7 Difference Types of Portland cements…………………………………………………………………… 8 The Manufacture of Ordinary Portland Cements ………………………………………………………… .9 Hydration of Portland Cements …………………………………………………………………………. 10 Composite Cement System ……………………………………………………………………………….. 11 Pozzolana ………………………………………………………………………………………………………. 12 Rice Husk ………………………………………………………………………………………………………. 13 Mixing Methods for Concrete ……………………………………………………………………………. 14 Types of Mixers ………………………………………………………………………………………………. 15 Curing Condition …………………………………………………………………………………………….. 15 Microstructural Analysis …………………………………………………………………………………… 16 Compressive Strengths……………………………………………………………………………………… 16 X-Ray Diffraction (XRD) …………………………………………………………………………………. 17 Crystal Structure and Chemical bonds…………………………………………………………………. 19 Relevant Works on Rice Husk-OPC Composites. …………………………………………………. 19

Chapter THREE

RESEARCH METHODOLOGY

  • MATERIALS AND METHODS …………………………………………………… 22 Materials and Methods ……………………………………………………………………………………… 22 Preparation of Rice husk powder ……………………………………………………………………… 22 Production of Specemens ………………………………………………………………………………….. 23 Casting and Compacting of the Concrete …………………………………………………………….. 23 – 8 – Compressive Strength Test ……………………………………………………………………………….. 25 X-Ray Diffraction Analysis ………………………………………………………………………………. 26

Chapter FOUR

DATA PRESENTATION AND ANALYSIS

  • RESULTS AND DISCUSSION …………………………………………………….. 28 Results of Compressive Strength Test …………………………………………………………………. 28 Results of X-Ray Diffraction Analysis ………………………………………………………………… 29 Discussions …………………………………………………………………………………………………….. 31 Compressive Strength ………………………………………………………………………………………. 31 X-Ray Diffraction Analysis (X.R.D) …………………………………………………………………… 31

Chapter FIVE

SUMMARY, CONCLUSION AND RECOMMENDATIONS

  • CONCLUSION AND RECOMMENDATION ……………….. 33 Summary ……………………………………………………………………………………………………….. 33 Conclusion……………………………………………………………………………………………………… 33 Recommendation …………………………………………………………………………………………….. 33 REFERENCES ……………………………………………………………………………………………….. 35 – 9 – LIST OF TABLES Table
  • 3.1Design …………………………………………………………………………………………………………. 24 4.1Compressive Strength of Rice Husk Cement Samples …………………………………………… 28
  • 4.2Observed Crystals (phases) in the X-Ray Diffraction Spectrum Peak ……………………… 29
  • 4.3Corresponding Lattice Parameters of the Crystals (Phases) ………………………………….. 30 – 10 

Thesis Abstract

High cost of cement has caused serious impact on housing delivery due to increase in
energy costs and high demand which attracted many research interests in sourcing other
alternatives cheaper materials. The use of rice husk powder in composites cement system
was investigated. Paste of neat and blended Portland cement with 5%, 10%. 15%, 20%,
25%, 30%, 35%, 40%, 45%, 50%, and 55% rice husk powder were cured in air under the
same temperature and humidity condition. Compressive strength of the various mix
proportions at 28 days were determined using standard compressive strengths testing
machine. The hydration products of the high percentage replacement composite cement
pastes were identified by x-ray diffraction analysis and compared with those made from
100% ordinary Portland cement pastes. Results indicate that only lower percentage
replacement level such as 5% and10% rice husk powder contained the required amounts
of silica which aided the hydration process producing samples with compressive
strengths of 19.72N/mm2 and11.57N/mm2when compared with control sample with
33.33N/mm2. However, result of the x-ray diffraction analysis showed that the observed
hydration products were mostly as expected due to the high replacement levels but the
degree to which crystal phases were identified in one of the samples was unusual. The
unusual behavior may be due to the fact that the calcium hydroxide initially formed was
consumed during the curing period confirming the important pozzolanic reactions of the
rice husk powder at such high replacement.
– 7 –

 


Thesis Overview

<p> 1.0 Introduction<br>Portland cement is the essential binding agent in cement composite systems, which in turn<br>is the most commonly used construction material worldwide due to its many advantages<br>including lower relative price, durability and other properties. (Escalante and<br>Sharp,2004). Its cost is increasing due to the increase in energy cost and high demand of<br>the product. However, to meet this demand other alternative cheaper materials are being<br>sourced. (Escalante and Sharp,2004 ).<br>Materials of natural origin such as volcanic ash (VA) or industrial by product, like<br>granulated blast furnace slag (GBFS) and pulverized fuel ash (PFA) have been widely<br>used as partial replacement of Portland cement in concrete construction (Escalante and<br>Sharp, 2004). Similarly, an agricultural waste rice husk has been described as a pozzolana<br>with promising cementing properties when used with Portland cement. (Amjad and<br>Abdul, 2004).<br>The advantages of these replacement materials are improved technical properties, lower<br>cost and a reduction of waste accumulation. For instance, replacement of 5% of the<br>aforementioned materials can provide a decrease of about 75×106 tons of CO2. (Escalante<br>and Sharp, 2004).<br>– 17 –<br>The idea of adding pozzolana to Portland cement or Portland cement concrete is widely<br>practiced because it does not only reduce cost and conserves energy, but decreases the<br>heat of hydration, increases compressive strength and durability. (Amjad and Abdul,<br>2004).<br>The introduction of replacement materials in Portland cement produces additional<br>complexity to the chemical reactions developed during hydration of the composite<br>cements. (Escalante and Sharp, 2004). It has been observed that both latent hydraulic and<br>pozzolanic materials participate in the overall hydration process and in the development<br>of microstructure. The dominant product of these reactions is C – S – H gel, which is<br>principally responsible for the mechanical properties of the hydrated cement. C – S – H<br>gel is generated by the interaction of the replacement materials with Portlandite (CH),<br>liberated during the hydration of the alite and belite present in the cement (Escalante and<br>Sharp, 2004).It is evident from many studies that variation in curing condition affects<br>pozzolanic reactivity of the composite cement. (Amjad and Abdul, 2004). However, little<br>or no attention has been paid to investigate how composite cement systems react at<br>fluctuating weather conditions of Zaria.<br>1.1 Statement of the Problem<br>Cement consumption is generally considered as an indicator of the growth of the Gross<br>National product (GNP) of a country. In Nigeria, it is estimated that the demand for<br>cement is about 18 million tones annually used mainly in the construction and building<br>industries. (Dadu,2008). While local production for the past 10 years is between 2.5 to<br>– 18 –<br>6.5 million tones annually. However, to meet this demand an alternative and cheaper<br>material is desirable.<br>Rice-husk, a pozzolanic materials and agricultural waste are land filled and burnt in open<br>piles which is not environmentally friendly. An easy and efficient way of utilizing this<br>waste is by using it with cement to serve the construction and building industries.<br>1.2 Aim of the Research<br>The study aims at investigating the compressive strength and identifying the crystal<br>phases of the composites.<br>1.3 Objectives<br>1. Determining the compressive strength of the composite by using standard compressive<br>strength testing machine.<br>2. Identifying the crystal phases of the hydration products by x-ray diffraction analysis.<br>1.4 Scope<br>The scope of the study embraces the crystal phase identification of the composite cement<br>and the determination of its compressive strength.<br>1.5 Significance of the Research<br>The result obtained from this research will advance and possibly open new frontiers of<br>knowledge in the production of cement composites by utilizing local raw materials. If<br>implemented, it would amount to saving cost on procurement of construction materials<br>like cement and also will help in controlling environmental problems that are associated<br>with the<br>– 19 –<br>burning of waste in rice production.<br>1.6 Delimitation of the Study<br>The investigation is delimited to production of composites from mixture of ordinary<br>Portland cement with rice husk powder.<br>1.7 Limitation of the Study<br>Some of the problems encountered in carrying out the study were lack of some research<br>facilities like;<br>1. Differential Thermal Analyzer: For examining the heat change during hydration<br>of the cement paste.<br>2. Scanning Electron Microscope: This is useful in the study and characterization of<br>the composite.<br>1.8 Research Question/Hypothesis<br>1. What are the crystalline phases of the composites and their relative proportion?<br>2. What are the measures of the compressive strength of the composites?<br>1.9 Basic Assumptions<br>a. That the crystalline phases and their relative proportions would comply with the<br>International Centre for Diffraction Data (ICDD) standards.<br>b. That the compressive strength achievable through mixing method would yield<br>satisfactory results. <br></p>

Blazingprojects Mobile App

📚 Over 50,000 Research Thesis
📱 100% Offline: No internet needed
📝 Over 98 Departments
🔍 Thesis-to-Journal Publication
🎓 Undergraduate/Postgraduate Thesis
📥 Instant Whatsapp/Email Delivery

Blazingprojects App

Related Research

Business education. 2 min read

Comparative Analysis of Entrepreneurial Skills Development in Business Schools World...

This research explores how business schools around the world help students develop entrepreneurial skills, which are essential for starting and managing success...

BP
Blazingprojects
Read more →
Business Administrat. 4 min read

Cross-Sectional Analysis of Leadership Styles and Employee Engagement in Tech Firms...

This research focuses on understanding how different leadership styles influence employee engagement within technology companies. Employee engagement refers to ...

BP
Blazingprojects
Read more →
Business administrat. 4 min read

Comparative Analysis of Leadership Styles and Organizational Performance in SMEs...

This research focuses on understanding how different leadership styles influence the performance of small and medium-sized enterprises (SMEs). Leadership styles...

BP
Blazingprojects
Read more →
Building. 2 min read

Comparative Analysis of Sustainable Building Practices in Residential versus Commerc...

This research explores the similarities and differences in sustainable building practices used in residential and commercial structures. Sustainable building pr...

BP
Blazingprojects
Read more →
Botany. 4 min read

Comparative Analysis of Drought Tolerance in Native versus Invasive Grass Species...

This research explores how well native and invasive grass species can tolerate drought conditions, which is important because droughts are becoming more frequen...

BP
Blazingprojects
Read more →
Biology education. 2 min read

Comparative Analysis of Inquiry-Based versus Lecture-Based Methods in High School Bi...

This research examines two common teaching methods used in high school biology classes: inquiry-based learning and lecture-based teaching. Inquiry-based learnin...

BP
Blazingprojects
Read more →
Biochemistry. 4 min read

Comparative Analysis of Lipid Profiles in AD Patients and Healthy Controls...

This research focuses on comparing the lipid profiles—measurements of fats and fat-like substances in the blood—of individuals diagnosed with Alzheimer’s ...

BP
Blazingprojects
Read more →
Banking and finance. 3 min read

Comparative Analysis of Digital Banking Adoption in Developed and Emerging Markets...

This research focuses on understanding how digital banking services are adopted differently in developed countries compared to emerging markets. Digital banking...

BP
Blazingprojects
Read more →
Art Education. 3 min read

Comparative Analysis of Digital Art Integration in Secondary School Curricula Across...

This research looks at how digital art is included in secondary school teaching in different countries and compares the approaches used. Digital art—using com...

BP
Blazingprojects
Read more →
WhatsApp Click here to chat with us