Blazingprojects Mobile App
📚 Over 50,000 Research Thesis
📱 100% Offline: No internet needed
📝 Over 98 Departments
🔍 Thesis-to-Journal Publication
🎓 Undergraduate/Postgraduate Thesis
📥 Instant Whatsapp/Email Delivery
Chemical engineering
Showing 1-810 of 856 Thesis
Adsorption Of Palm Oil With Synthetic Adsorbent Coal...
This project was Carrie lent using sub-bituminous coal and crude palm oil. The degree of bleaching of the palm oil was monitored with a spectorphoto meter. Th...
Effect Of Temperature On Hydrolysis Of Cellulose Saw-Dust...
The effect of concentration of hydrochloric acid on hydrolysis of cellulose (saw-dust) to glucose was studied on this research project and the steps obtained ...
Assessment Of Carbon Monoxide Co Level In Enugu Metropolis Monitoring Industrial And...
Air pollutions pollutant showed that the extent of spreading depends on the motor vehicle traffic population of the area. This pollution strongly generated th...
Refining Of Soya Bean Oil...
This project work studied the refining of crude soya bean oil extracted from soya bean seed using alkali /caustic refining method. The work was carried out us...
Kinetic Study On Hydrolysis Of Cellulose (Saw-Dust)...
This research project studied on the kinetics of hydrolysis of cellulose to glucose. The steps employed to achieve this project involved extraction of cellulo...
Kinetic Study On Hydrolysis Of Cellulose (Saw-Dust)...
This research project studied on the kinetics of hydrolysis of cellulose to glucose. The steps employed to achieve this project involved extraction of cellulo...
Design And Fabrication Of Maize Corn-On-Cob Tray Dryer...
This study was carried out to generate a design data, design and fabricate a maize corn-on-cob tray dryer used by maize farmers. Ripped maize corns with husks...
Comparative Analysis Of Coal, Fuel Oil And Natural Gas For Cement Production...
This study is a comparative analysis of the use of coal, fuel oil and natural gas for cement production noting their physical and chemical properties, cost an...
Production Of Yam Flour...
The project dealt on the production of yam flour from yam chips. The yams were peeled and washed, 100grams samples coded sample A to G were subjected to two d...
Phytochemical Analysis On Moringa Oleifera And Azadrichta Indica Leaves...
Studies were conducted to determine the phytochemicasl present in moringa olrifera and Azadrichta indica leaves. Leaves for this work were washed, room dried ...
Anti-Inflammatory Activity Of Crateva Adansonii Dichloromethane Fraction...
Crateva adansonii is a medicinal herb commonly used in parts of Africa because of the side effects of Non-Steroidal Anti-inflammatory Drugs (NSAID), like hear...
Elemental Analysis On Pterocarpus Mildbreadii (Oha)Seed...
Elemental analysis is the qualitative detection and quantitative determination of chemical elements(atoms,ions)in a sample(Fritz Pregl 1923). To detect an
el...
Phytochemical Analysis And The Anti-Inflammatory Activities Of Dichloromethane Fract...
Inflammation is a complex biological response of vascular tissue to harmful stimuli such as pathogen, damage cells or irritants (Ryan & Majno, 1983). The ...
Analysis Of Crude Palm Oil...
This project was carried out to ascertain whether the local palm oil met the required standard. The analytical test carried out include the free fatty acid te...
Comparative Analysis Of Coal And Coconut Activated Carbon...
The experiment was carried out to analyze comparatively coal and coconut activated carbon. The coal sample used in bituminous and with density of 1300kg 1m3 t...
Synthesis Of Activated Carbon From Enugu Coal...
This project was carried out using coal sample from Onyeama coal mine Enugu, Enugu State. Activated coal was produced by carbonizing the coal and activating i...
Bleaching Of Palm Oil Using Activated Charcoal...
This project work is on the bleaching of palm oil using activated charcoal.
The charcoal used for this work was made from pieces of animal bone by carboniz...
Effect Of Liquid Flow rate And Gas Flow Rate On A Packed Absorption Tower And Repair...
The purpose of the project is to study the effect of liquid flow rate and gas flow rate on the pressure drop in a packed absorption tower and also to repair a...
THE EFFECT OF ENVIRONMENT ON CORROSION...
In this research project, the various nail were subjected to six environments so as to check the effect of the environments on corrosion of the nails.Two sets...
SELECTION OF LUBRICATING OILS FOR VARIED ENGINE PERFORMANCE...
The topic of this project is the “selection of lubricating oils for varied engines performanceâ€. The aim is to specify the adequate lubricating oi...
PRODUCTION OF CASSAVA FLOUR USING TRADITIONAL PROCESSING METHOD AND MODERN PROCESSIN...
The production of cassava flour by the method of traditional processing method (sun drying) and modern processing method (oven drying) was carried out using c...
PRODUCTION OF PLASTIC MATERIALS...
Generally, plastic is defined as long-chain organic material which can be formed into desired shape by the application of heat and pressure, also it extends t...
INDUSTRIAL WASTEWATER TREATMENT TECHNOLOGY IN PETROLEUM AND CHEMICAL INDUSTRIAL...
Industrial wastewater treatment covers the mechanisms and process used to treat water that have been contaminated in some way by anthropocentric industrial or...
FORMULATION AND PRODUCTION OF ALCOHOL FROM PALM WINE...
This research work was arrived as the formulation and production of ethanol (ethyl alcohol) from the fermentation of palm wine. A fresh palm wine was ated whi...
CONSTRUCTION OF ALUMINIUM WALL RACK...
This project was constructed with the desired materials of construction. The materials include aluminum, glass and wood. Aluminum was used in forming the ske...
CONSTRUCTION OF A MODEL SHELL AND TUBE HEAT EXCHANGER...
The precise content of this project was to construct a model shell and tube heat exchanger. The material for construction of this ...
CONSTRUCTION OF A JUICE EXTRACTOR MACHINE...
A Juice extractor machine is a device that is used to extract liquid (Juice) from fruits and vegetables in a process called juicing.The machine is constructed...
CONSTRUCTION OF A "CHEMICAL RACK"...
The project done was a metal chemical rack. The rack was made of steel, which is soft to cutting, blending and several other operations applied to the metal d...
CONSTRUCTION OF INDUSTRIAL WHEEL BARROW...
Wheel barrow can be defined as a simple machine used in transferring heavy loads materials from one place to another by pushing. It can be used or serve...
CONSTRUCTION OF A SIMPLE SIZE REDUCTION MACHINE...
This project (Construction Of A Simple Size Reduction Machine) It was constructed locally with the use of local materials and tools in I.M.T mechanical Engine...
