Design And Construction Of Battery Charger | Blazingprojects Postgraduate Thesis
Home / Electrical electronics engineering / Design And Construction Of Battery Charger

Design And Construction Of Battery Charger

 

Table Of Contents


  • Title Page Approval Page Dedication Acknowledgement AbstractChapter One
  • 1.1IntroductionChapter Two
  • 2.1Block Diagram Of Battery Charger
  • 2.2Transformer
  • 2.3Ac To Dc Converter
  • 2.4Filtering
  • 2.5Voltage Regulation
  • 2.6Comparator
  • 2.7Thyristor
  • 2.8Resistor
  • 2.9Diode
  • 2.10Relay
  • 2.11Zener DiodeChapter Three
  • 3.1Network Synthesis And Testing
  • 3.2Power Supply
  • 3.3Sensing And Switching Circuit
  • 3.4Battery Condition Test
  • 3.5List Of Component ValuesChapter Four
  • 4.1Conclusion
  • 4.2Cost Analysis Bibliography

Thesis Abstract

This project which consists of four chapters deals extensively with the design and construction of a battery charger which is capable charging a 12 volts, battery.The first chapter which is the introductory chapter goes a long way in defining the battery charger and explaining of the mode of operation.The second chapter went further to explain each component part of the battery charger. This ranges from-1. The transformer 2. The rectifier circuit3. The filtering stage4. Voltage regulation5. Comparator 6. Thyristor7. Resistor8. Diode9. Relay10. Zener diode and11. Light emitting diode (LED)The third chapter explains more about the Testing Sensing and switching processes in the charger. It also gave the list of components and the circuit diagram of the battery charger.The concluding chapter being fourth, tells us more about the circuit arrangements and the construction of casing and finally the overall cost analysis.

Thesis Overview

1.1 INTRODUCTION
A device, which consist of electrodes and electrolyte for the storage of chemical energy, but brings about a reaction between its electrodes and the electrolyte in a way to cause the flow of electrons through an external circuit is known as a battery.
There are two types of batteries, these include the primary and secondary battery. The primary (dry cell) is one whose electrolyte dries up when used to its ampere-hour rating and cannot be recharged while the secondary (wet cell) is one whose chemical energy can be restored through a charging process. There are different types of secondary battery. These comprises lead acid, Nickel-cadmium and silver zinc battery.
Furthermore, a battery is a combination of cells connected together and a cell is a simple source of electric potential. The maintenance of secondary battery is of importance partially where maximum performance and life are obtained. As long as a battery is in use, its stored chemical energy, which is being converted to electrical energy falls. This falls in chemical energy leads to a corresponding fall in its terminal voltage.
A constant potential method of charging is adopted in this project work. It is a phenomenon whereby the alternating voltage from the main is converted to direct voltage through rectification.
The direct current from the rectifier is then passed through the battery that is being charged in the reversed direction in which the battery supplies current to the external circuit. The charger is intended to charge batteries with terminal voltage up to 12volts. It incorporates a sensing technique to monitor when the battery has been charged to its rated terminal voltage so as to automatically cut off supply to the battery.
Hence, a battery charger which is of low cost, highly efficient and cheap to maintain is needed to restore its rated terminal voltage.
The entire circuit is made up of five basic units and details of each units is highlighted in the subsequent chapters.

Blazingprojects Mobile App

📚 Over 50,000 Research Thesis
📱 100% Offline: No internet needed
📝 Over 98 Departments
🔍 Thesis-to-Journal Publication
🎓 Undergraduate/Postgraduate Thesis
📥 Instant Whatsapp/Email Delivery

Blazingprojects App

Related Research

Industrial chemistry. 3 min read

A Framework for Circularity-Oriented Catalytic Process Design in Industry...

This research explores how catalytic processes in industry can be redesigned to support circular economy principles, reducing waste, conserving resources, and e...

BP
Blazingprojects
Read more →
Human resource manag. 4 min read

A Dynamic Resilience-Based Framework for HR Transformation and Outcomes...

This research explores how organizations can make HR practices more resilient and dynamic in the face of rapid changes such as technology disruption, demographi...

BP
Blazingprojects
Read more →
Home and rural econo. 3 min read

A Farm-Province Adaptive Resilience Framework for Rural Households...

This research investigates how rural households connected to both farming and provincial markets build resilience to shocks and stresses. It addresses the gap b...

BP
Blazingprojects
Read more →
Geo-science. 3 min read

A Framework for Integrating Isotopic Signatures in Sedimentary Basin Thermochronolog...

This research explores how isotopic signatures can be integrated into thermochronology studies of sedimentary basins to better understand their thermal historie...

BP
Blazingprojects
Read more →
French. 2 min read

Cadre théorique pour l’évaluation éthique des IA en entreprise ...

This research explores how to build and apply a theoretical framework for evaluating the ethics of artificial intelligence (AI) used in business settings. It as...

BP
Blazingprojects
Read more →
Environmental scienc. 3 min read

A Resilience-Framing Framework for Urban Water–Energy–Waste Nexus Governance...

The research topic explores how cities can manage the interconnected systems of water, energy, and waste more effectively by using a resilience-framing framewor...

BP
Blazingprojects
Read more →
Environmental manage. 2 min read

A Resilience-Framing Framework for Urban Environmental Management Systems...

This research explores a resilience-framing framework for urban environmental management systems, focusing on how cities plan for, respond to, and learn from en...

BP
Blazingprojects
Read more →
Communication and li. 3 min read

A Pragmatic-Narrative Alignment Model for Multilingual Interaction...

The research investigates how speakers manage meaning across languages in multilingual settings by proposing a Pragmatic-Narrative Alignment Model. It aims to e...

BP
Blazingprojects
Read more →
Art and Design. 2 min read

A Framework for Cross-Sensory Narrative in Contemporary Art Design...

A Framework for Cross-Sensory Narrative in Contemporary Art Design is about how artists combine multiple senses—such as sight, sound, touch, and even smell or...

BP
Blazingprojects
Read more →
WhatsApp Click here to chat with us