Refining of soya bean oil | Blazingprojects Postgraduate Thesis
Home / Chemical engineering / Refining of soya bean oil

Refining of soya bean oil

 

Table Of Contents


  • Title page … … … … … … … … … … iCertification… … … … … … … … … … iiDedication… … … … … … … … … … iiiAcknowledgement… … … … … … … … … ivAbstract… … … … … … … … … … … vTable of contents… … … … … … … … … viList of table … … … … … … … … … … viiiList of figure… … … … … … … … … … ixCHAPTER ONE1.1 Introduction… … … … … … … … …
  • 11.2Background of the study… … … … … … …
  • 31.3Statement of the problem… … … … … … …
  • 91.4Objectives of the study… … … … … … …
  • 91.5Scope of the study… … … … … … … … 10CHAPTER TWO2.0 Literature Review… … … … … … … …
  • 112.1Historical Background of Soyabeans … … … … … 112.
  • 1.1Composition of Soyabean … … … … … … 132.
  • 1.2Soya Chemistry… … … … … … … … 142.
  • 2.Food Beans and Oil Beans… … … … … … … 152.
  • 2.1Health and soya Foods… … … … … … … 172.
  • 3.Composition of Soyabean Oil… … … … … … 192.
  • 3.1Triglyceric Structure… … … … … … … 202.
  • 3.2Physical Properties of Soyabean Oil… … … … … 212.
  • 4.Recovery of Oil from Soyabean… … … … … … 242.
  • 4.1Storage and Preparation of Beans… … … … … 242.
  • 4.2Solvent Extraction… … … … … … … … 252.
  • 4.3Oil Storage… … … … … … … … … 262.
  • 5.Edible Oil Processing… … … … … … … … 272.
  • 5.1Basic Processing Operations andPrinciple Edible Oil Product… … … … … … 282.
  • 5.2Oil Degumming and Soyabean Lecithin… … … … 292.
  • 6.Refining Of Soyabean Oil… … … … … … … 312.
  • 6.1Chemical (Caustic) Refining… … … … … … 332.
  • 6.2Physical (Steam) Refining… … … … … … 352.
  • 7.Bleaching… … … … … … … … … … 362.
  • 7.1Bleaching Process… … … … … … … … 382.
  • 7.2Types of Adsorbents Used… … … … … … 402.
  • 8.Deodourization… … … … … … … … … 4182.
  • 8.1Deodourization of Soyabean Oil… … … … … 422.
  • 8.2Effect of Deodourization on Oil Quality… … … … 432.
  • 9.Evaluation of Finished Oil Quality… … … … … 432.
  • 9.1Storage and Handling … … … … … … … 44CHAPTER THREE3.0 Materials and Methods… … … … … … …
  • 463.1Materials Used… … … … … … … … …
  • 463.2Equipments Used… … … … … … … …
  • 463.3Reagents Used… … … … … … … … …
  • 473.4Preparation of Reagents… … … … … … …
  • 483.5Procedures… … … … … … … … …
  • 493.6Testing of Oil… … … … … … … … … 503.
  • 6.1Test for Saponification Value… … … … … … 513.
  • 6.2Test for Iodine Value… … … … … … … 513.
  • 6.3Test for Acidic Value… … … … … … … 523.
  • 6.4Test for Specific Gravity… … … … … … … 523.
  • 6.5Test for Viscosity… … … … … … … … 53CHAPTER FOUR4.0 Results and Discussion… … … … … … …
  • 544.1Results… … … … … … … … … …
  • 544.2Titration Readings… … … … … … … …
  • 554.3Discussion … … … … … … … … … 58CHAPTER FIVE5.0 Conclusion and Recommendation… … … … …
  • 595.1Conclusion… … … … … … … … … …
  • 595.2Recommendation… … … … … … … … 59References … … … … … … … … … 60Appendices… … … … … … … … … 629LIST OF TABLETable
  • 2.1Composition of soyabean oil… … … … … 19Table 2.2: Average composition for crudeand refined soyabean oil… … … … … … 20Table2.3 Selected physical properties of soyabean oil… … … 22Table
  • 2.4Density of soyabean at several temperatures… … 22Table
  • 2.5Smoke, flash and fire pointsâtemperatures of soyabean oil … … … … … 23Table
  • 2.6Classical refining of soyabean oil … … … … 32Table
  • 3.1Degummed soyabean oil with differentquantities of sodium hydroxide … … … … … 50Table
  • 4.1Result of the degummed soyabean oil… … … … 54Table
  • 4.2Result of the canstic refining of soyabeanoil with different quantities… … … … … … 54Table
  • 4.3Test results of the properties of therefined oil and crude oil. … … … … … … 55Table
  • 4.4titration reading of saponification value of refined oil… 55Table
  • 4.5 titration reading of Iodine value of refined oil … … 56Table
  • 4.6Titration reading of Acidic value of refined oil… … 56Table
  • 4.7titration reading of saponification value of crude oil… 56Table
  • 4.8titration reading of iodine value of crude oil… … 57Table
  • 4.9titration of acidic value of crude oil… … … … 5710LIST OF FIGUREFig 1:1-Generation flow sheet for refining and processingfats and oils… … … … … … … … … 4Fig 2:1 Front View of Soyabean Seed … … … … … … 12Fig
  • 2.2A general outline of the soyabean food use basedon classification of oil and food Bean… … … … … 1611

Thesis Abstract

This project work studied the refining of crude soya bean oil extracted from soya bean seed using alkali /caustic refining method. The work was carried out using phosphoric acid for the degumming /pretreatment process and sodium hydroxide for the neutralization /refining of the oil. Certain tests were carried out on both the crude and refined oil such as saponification value, acidic value, iodine value, specific gravity and viscosity, the results obtained after the tests include 42.075, 164.28, 589.05, 0.8944 and 0.038 respectively for refined oil and 44.88, 109.52, 448.8, 0.8148 and 0.035 respectively for the crude oil.7

Thesis Overview

<p> </p><p><strong>1.1 INTRODUCTION</strong></p><p>Refining of vegetable oils is essential to ensure removal of germs, phosphatides and free fatty acids (F.F.A) from the oil, to impact uniform colour by removal of colouring pigments and to get rid of unpleasant smell from the oil by removal of odiferous matter.Refining is carried out either on batch operation or as continuous operation. With certain oils even physical refining can be carried out instead of chemical.For processing less than thirty tones of oil per 24 hours, and when oil has F.F.A content of 1 percent or less normally batch process is recommended. Batch process involves low capital investments, simplicity of operation and low maintenance, making refining economically a viable proposition even at capacity as low as 10 tonnes per 24 hours. (According to Dietary fats and oils in Human Nutrition. (Rome 1977)).</p><p>12Soyabean oil is produced from the seed of the legume called soja max or calyclue max. The seed has an oil content of about 20%, it is the highest volume vegetable oil produced in the world. The crude oil is obtained by pressing or solvent extraction method. The main uses of the oil after refining, bleaching and deodorization and partial hydrogenation are in the manufacture of Magrine and shortening. The unhydrogenated oil is also used in blends with other oil but its tending to revert when exposed to air or higher temperatures limits its use. (Hand book of industrial chemistry, Reigel et al, (2003)).Soyabean oil is also used extensively in the manufacture of drying oil products.Crude soyabean oil of good quality has a lighter amber colour which upon alkali refining is reduced to the light yellow colour of most vegetable seed oils. Soyabean oil produced from green or immature beans may contain sufficient chlorophyll to have a greenish cast but this is not usually very evident until after the yellow red pigment of the oil have been bleached in hydrogenation (G.S Breck and S.C Bhatia, 2008).</p><p>13The crude oil particularly that obtained by solvent extraction contains relatively large amount of non-glyceride materials consisting chiefly of phosphatide. They are removed by water washing during refining processes. The phosphatides removed by water washing are converted to soya lecithin. The free fatty acid content of good crude soyabean oil like that many other vegetable oil is slightly in excess of 0.5 percent. (Hand book of Industrial chemistry,Reigel et al (2003)).</p> <br><p></p>

Blazingprojects Mobile App

📚 Over 50,000 Research Thesis
📱 100% Offline: No internet needed
📝 Over 98 Departments
🔍 Thesis-to-Journal Publication
🎓 Undergraduate/Postgraduate Thesis
📥 Instant Whatsapp/Email Delivery

Blazingprojects App

Related Research

International relati. 4 min read

A Global Expectation Framework for Strategic Diplomacy under Multipolarity...

This research explores how global leaders and major powers coordinate diplomatic behavior in a world where power is distributed among several influential region...

BP
Blazingprojects
Read more →
Industrial chemistry. 3 min read

A Framework for Circularity-Oriented Catalytic Process Design in Industry...

This research explores how catalytic processes in industry can be redesigned to support circular economy principles, reducing waste, conserving resources, and e...

BP
Blazingprojects
Read more →
Human resource manag. 4 min read

A Dynamic Resilience-Based Framework for HR Transformation and Outcomes...

This research explores how organizations can make HR practices more resilient and dynamic in the face of rapid changes such as technology disruption, demographi...

BP
Blazingprojects
Read more →
Home and rural econo. 4 min read

A Farm-Province Adaptive Resilience Framework for Rural Households...

This research investigates how rural households connected to both farming and provincial markets build resilience to shocks and stresses. It addresses the gap b...

BP
Blazingprojects
Read more →
Geo-science. 4 min read

A Framework for Integrating Isotopic Signatures in Sedimentary Basin Thermochronolog...

This research explores how isotopic signatures can be integrated into thermochronology studies of sedimentary basins to better understand their thermal historie...

BP
Blazingprojects
Read more →
French. 4 min read

Cadre théorique pour l’évaluation éthique des IA en entreprise ...

This research explores how to build and apply a theoretical framework for evaluating the ethics of artificial intelligence (AI) used in business settings. It as...

BP
Blazingprojects
Read more →
Environmental scienc. 4 min read

A Resilience-Framing Framework for Urban Water–Energy–Waste Nexus Governance...

The research topic explores how cities can manage the interconnected systems of water, energy, and waste more effectively by using a resilience-framing framewor...

BP
Blazingprojects
Read more →
Environmental manage. 2 min read

A Resilience-Framing Framework for Urban Environmental Management Systems...

This research explores a resilience-framing framework for urban environmental management systems, focusing on how cities plan for, respond to, and learn from en...

BP
Blazingprojects
Read more →
Communication and li. 4 min read

A Pragmatic-Narrative Alignment Model for Multilingual Interaction...

The research investigates how speakers manage meaning across languages in multilingual settings by proposing a Pragmatic-Narrative Alignment Model. It aims to e...

BP
Blazingprojects
Read more →
WhatsApp Click here to chat with us