Development and use of nonwood plant fibers in pulp and papermaking | Blazingprojects Postgraduate Thesis
Home / Chemical engineering / Development and use of nonwood plant fibers in pulp and papermaking

Development and use of nonwood plant fibers in pulp and papermaking

 

Table Of Contents


  • No response received.

Thesis Abstract

Abstract
The development and utilization of nonwood plant fibers in the pulp and paper industry have gained significant attention in recent years due to environmental concerns, sustainability issues, and the desire to diversify raw material sources. Nonwood plant fibers, such as those derived from agricultural residues, grasses, and other plant sources, offer a promising alternative to traditional wood-based fibers for papermaking. This research project aims to explore the potential of nonwood plant fibers in pulp and paper production, focusing on their properties, processing methods, and paper quality. The study begins with an overview of the current state of the pulp and paper industry, highlighting the challenges faced by the sector in terms of raw material availability and environmental impact. It then delves into the characteristics of nonwood plant fibers, including their fiber morphology, chemical composition, and pulping suitability. Various nonwood plant fiber sources are evaluated for their potential as pulp feedstock, considering factors such as fiber length, strength, and flexibility. The research investigates different pulping and bleaching techniques suitable for nonwood plant fibers, aiming to optimize the process parameters for efficient fiber separation and delignification. Both chemical and mechanical pulping methods are explored, with a focus on minimizing energy consumption and environmental impact. The study also examines the impact of processing conditions on paper properties, such as strength, brightness, and printability. Furthermore, the project assesses the economic feasibility of incorporating nonwood plant fibers into existing papermaking processes, considering factors such as production costs, energy requirements, and market demand. Life cycle assessment tools are utilized to evaluate the environmental footprint of nonwood fiber-based paper products compared to traditional wood-based papers. Overall, this research contributes to the growing body of knowledge on nonwood plant fibers in pulp and papermaking, offering insights into their potential applications and challenges. By diversifying raw material sources and reducing dependence on wood-based fibers, the industry can enhance its sustainability profile and address environmental concerns. The findings of this study have implications for pulp and paper manufacturers, policymakers, and environmental stakeholders seeking to promote the use of alternative fibers in the paper industry.

Thesis Overview

<p> </p><p><strong>1.0 &nbsp;</strong><strong>INTRODUCTION</strong></p><p><strong>1.1 HISTORICAL BACKGROUND OF THE STUDY</strong></p><p>The earlist information about usage of grasses as a writing material dates back to 3000 be in Egypt where the pressed pith tissue of papyrus sedge Cyperus Papyrus L. was the most widely used writing material. Actual papermaking was discovered by a Chinese Ts’ ai Lun in 105 AD, when he found a way of making sheets using fibres from hemp rags and mulberry plant. Straw was used for the first time as a raw material for paper in 1800, and in 1827 started the first commercial mill to pulp straw in the USA Atchison and MCGovern 1987. In the 1830’s Anseline payer found a resistant fibrous material which exists in most plant tissue, payen 1842. The substance, which the French Academy named Cellulose in 1839, Brongiart et al, 1839, Hon 1994. This was the turning point in the use of all fibres, and it led to the invention of the new pulping methods which used soda, sulphite or sulphate as a cooking chemical. Paper could be made from ceveal straw, reed, esparto grass, independence weed and even from wood became the main raw material for paper.</p><p>During the next several centuries, the art of papermaking grew far and wide from Japan in the east, to siam “now Thailand in the south, to Chinese Turkestan in the west.</p><p>In Turkestan, in 751 AD, papermaking was learned by the Arabs who brought it westward over their trade routes. Papermaking reached Samarkand, Baghdad 793AD, Damascus, Cairo 900AD and fez 1100AD. From there it spread to Spain in 1151AD then to France in 1348AD and later on to Germany in 1390AD. In the region where paper mulberry bamboo and China grass as linen and cotton rags were used. Atchison and Micgovern, 1989.</p><p>In Europe and North America active research has been Undertaken to find a new non-wood raw material for paper production. The driving force was the shortage of short-fibre raw material i.e hardwood in Nordic countries which export pulp and paper and, at the same time face problem of agricultural over production. The consumption of paper, especially fine paper, continuous to grow, which will increase the demand of short-fibre pulp, paavilianen 1996.</p><p>Today, the highest ratio of nonwood to total papermaking pulp capacities are in the developing market economics &nbsp;of Asia, Africa and Latin America, as well as the centrally planned economics of Asia. Some of these regions have more nonwood plant pulping capacities. Than wood pulping capacities indeed, China has more than twice as much.</p><p>Further, total nonwood plant pulping capacity worldwide is increasing faster than the wood pulping capacity. Their respective annual rates of increase were 6% for annually nonwood as compared to 2% annually for wood pulp during the period from 1988-1993. It is expected to be 2.5% annually for nonwood and 1% for wood during the period from 1993-1988. As a result, nonwood plant pulp capacity as percentage of total papermaking pulp capacity”, has increased from 6.7% in 1970 to 10.6% in 1993. It currently stands at 10.4% and is expected to reach. 11.2% by 1998.</p><p>Of the total 20,887,000 metric tons of nonwood plant fiber pulp produced in 1995, 15, 957,000 metric ton were produced in China. This accounts for over 76 percent total world wood fiber. Pulp production and over 83% of total Chinese pulp production. At the same time, the level of pollution from these mills is very high. &nbsp;In 1976, Nan ping city, a mid-size city in Fujian province, had 86 small papermills. These paper mills discharged 19million gal/year of waste water and 26,000 ton/year of COD 51% of the total COD discharge for the city. Some of these mills were closed 1996 Xing 1996.</p><p><strong>1.2 STATEMENT OF THE PROBLEM</strong></p><p>The research work is on the production of pulp and paper from Awolowo grass. Growth in pulp and paper production entails massive falling of trees, which in turn leads to deforestation. Increasing competition for wood supplies coupled with gradually rising lost wood plant fibers for papermaking. The demand for nonwood plant fibers for papermaking is expected to increase in the highly industrialized nations of Europe and North America due to the above environmental concern like depleting forest resources and disposal of agricultural residues.</p><p><strong>1.3 OBJECTIVE OF THE STUDY</strong></p><p>The aim of this project are threefold, to study the forces responsible for development and use of nonwood plant fibers in pulp and papermaking and also to identify technological and economical problems associated with use of nonwood plant fibres in pulp and paper making and solution available and then to review the use of fibers in paper industry and identify opportunity available.</p><p><strong>1.4 SCOPE/LIMITATION OF THE STUDY</strong></p><p><strong>1.4.1 SCOPE OF THE STUDY</strong></p><p>The scope of this project will cover the process of pulp and paper making using nonwood fibers and the study will be focused on determining the properties of nowood fibers, describe the method of production, look at the procedures for pulp and paper making and application of nonwood fibers.</p><p><strong>1.4.2 LIMITATION OF THE STUDY &nbsp; &nbsp;</strong></p><p>During the research work lots of barriers were encountered such as fund, this was a major bottle neck in the course of this study, the purchase of materials for production, transportation requires lots of money in order to achieve a researchable. Time: due to some other school engagement such as lectures, reading, assignment and quiz e.t.c the study posed huge threat resulting from limited time.</p><p><strong>1.5 METHOD OF RESEARCH</strong></p><p>The method of research involves two aspect</p><p><strong>Descriptive and</strong></p><p><strong>Laboratory</strong></p><p>The Descriptive method is concern with the study of library, Article journals, and also the use of internet browsing while</p><p>Laboratory research method involves conducting experiment, obtain result and result analysis.</p><p><strong>1.6 SIGNIFICANCE OF THE STUDY</strong></p><p>The production of pulp and papermaking has played a significance role in mankind and industries. The study helps student to gain practical or laboratory experience it also create employment opportunity for the teeming unemployment youth in this country. It also booster industrial utilization of local raw material available in the immediate environment.</p> <br><p></p>

Blazingprojects Mobile App

📚 Over 50,000 Research Thesis
📱 100% Offline: No internet needed
📝 Over 98 Departments
🔍 Thesis-to-Journal Publication
🎓 Undergraduate/Postgraduate Thesis
📥 Instant Whatsapp/Email Delivery

Blazingprojects App

Related Research

Medical Rehabilitati. 3 min read

A Framework for Patient-Centered Design in Remote Medical Rehabilitation Programs...

This research focuses on creating a practical framework to guide the design of remote medical rehabilitation programs that are centered around the needs and pre...

BP
Blazingprojects
Read more →
Medical Laboratory S. 2 min read

A Framework for Standardizing Quality Control Practices in Clinical Laboratory Testi...

This research focuses on developing a clear and practical framework to standardize quality control practices in clinical laboratory testing. Quality control in ...

BP
Blazingprojects
Read more →
Mechanical engineeri. 3 min read

A Framework for Parametric Modeling of Additive Manufacturing Mechanical Properties...

This research focuses on developing a systematic framework to model the mechanical properties of materials produced through additive manufacturing (AM), also kn...

BP
Blazingprojects
Read more →
Mathematics. 2 min read

A Framework for Modeling Nonlinear Dynamics in Chaotic Systems...

This research aims to develop a comprehensive framework for understanding and modeling nonlinear dynamics in chaotic systems. Chaotic systems are complex system...

BP
Blazingprojects
Read more →
Materials and Metall. 3 min read

A Framework for Predicting Corrosion Resistance in Aluminum Alloy Composites...

This research focuses on developing a structured way to predict how well aluminum alloy composites resist corrosion, which is a common challenge in many industr...

BP
Blazingprojects
Read more →
Mass communication. 2 min read

A Framework for Analyzing the Impact of Social Media Influencers on Youth Political ...

This research examines how social media influencers affect the way young people engage with politics. In recent years, social media influencers—individuals wi...

BP
Blazingprojects
Read more →
Marketing. 4 min read

A Framework for Integrating Social Media Engagement into Customer Loyalty Models...

This research explores how social media engagement influences customer loyalty, aiming to create a new framework that combines these two areas. Customer loyalty...

BP
Blazingprojects
Read more →
Linguistics. 4 min read

A Framework for Analyzing Code-Switching as a Pragmatic Competence...

This research is focused on understanding how people switch between languages or dialects in everyday conversation, a phenomenon known as code-switching. Specif...

BP
Blazingprojects
Read more →
Library Science Educ. 3 min read

A Framework for Enhancing Critical Teaching Skills in Library Science Education...

This research focuses on developing a clear and practical framework that can help improve the way library science educators teach critical thinking skills. Crit...

BP
Blazingprojects
Read more →
WhatsApp Click here to chat with us