Thesis Abstract

Abstract
The optimization of hydraulic fracturing parameters is crucial for enhancing oil recovery in petroleum engineering. This thesis investigates the various parameters involved in hydraulic fracturing and their impact on oil recovery efficiency. The study aims to provide insights into optimizing these parameters to maximize oil production and improve overall reservoir performance. The research begins with a comprehensive literature review to establish the current understanding of hydraulic fracturing techniques and their applications in the oil and gas industry. Various factors affecting the success of hydraulic fracturing operations are analyzed, including wellbore design, fluid properties, proppant selection, and fracture geometry. By reviewing existing studies, the research identifies gaps in knowledge and highlights the need for further optimization strategies. Chapter three outlines the research methodology employed in this study, including data collection methods, simulation techniques, and analytical approaches. The methodology is designed to evaluate the impact of different fracturing parameters on oil recovery and identify the most effective strategies for optimization. Laboratory experiments and numerical simulations are conducted to validate the findings and provide a scientific basis for the proposed optimization techniques. Chapter four presents a detailed discussion of the research findings, focusing on the effects of various fracturing parameters on oil recovery efficiency. The analysis considers factors such as fracture conductivity, proppant concentration, injection rate, and fluid viscosity to determine their influence on reservoir performance. By comparing different scenarios and optimization strategies, the study identifies key parameters that significantly impact oil recovery and proposes recommendations for improving fracturing operations. In conclusion, this thesis provides valuable insights into the optimization of hydraulic fracturing parameters for enhanced oil recovery. By integrating theoretical analysis, experimental data, and simulation results, the research highlights the importance of optimizing fracturing techniques to maximize oil production and enhance reservoir performance. The findings of this study have significant implications for the oil and gas industry, offering practical recommendations for improving hydraulic fracturing operations and increasing oil recovery rates.

Thesis Overview

The project titled "Optimization of Hydraulic Fracturing Parameters for Enhanced Oil Recovery" aims to investigate and optimize the key parameters involved in hydraulic fracturing to enhance oil recovery from reservoirs. Hydraulic fracturing, commonly known as fracking, is a well stimulation technique used to extract oil and gas from deep underground reservoirs. This project will focus on optimizing the parameters associated with hydraulic fracturing to improve the efficiency and effectiveness of the extraction process. The research will begin with a comprehensive literature review to explore the existing knowledge and research on hydraulic fracturing in the context of oil recovery. This review will cover topics such as the principles of hydraulic fracturing, the factors influencing oil recovery efficiency, and the current practices and technologies used in the industry. By synthesizing this information, the research aims to identify gaps in knowledge and opportunities for optimization. The methodology chapter of the project will outline the research approach and techniques that will be employed to achieve the objectives of the study. This will include details on data collection methods, experimental procedures, and analytical tools that will be used to evaluate and optimize the hydraulic fracturing parameters. The research methodology will be designed to provide reliable and accurate results that can be used to improve oil recovery processes. The discussion of findings chapter will present the results of the research, including the analysis of the optimized hydraulic fracturing parameters and their impact on oil recovery. The findings will be discussed in relation to the existing literature and industry practices, highlighting the significance of the research outcomes and their implications for the field of petroleum engineering. This section will also address any limitations or challenges encountered during the study and provide recommendations for future research in this area. In conclusion, the project will summarize the key findings and conclusions drawn from the research, emphasizing the importance of optimizing hydraulic fracturing parameters for enhanced oil recovery. The study aims to contribute valuable insights and recommendations that can be applied by industry professionals to improve the efficiency and sustainability of oil extraction processes. Overall, this research will advance our understanding of hydraulic fracturing techniques and their potential to enhance oil recovery from reservoirs, contributing to the broader goal of maximizing resource utilization in the petroleum industry.