Home / Electrical electronics engineering / Design And Construction Of A 3 Way Inter Communication System

Design And Construction Of A 3 Way Inter Communication System

 

Table Of Contents


Title Page
Certification
Dedication
Acknowledgement
Abstract
Table Of Contents

Chapter ONE


1.0 Introduction

Chapter TWO


2.0 Complete Circuit Description

2.1 Simplified Block Diagram Of Thee 3-Way Intercom System
2.2 Operation Principles

Chapter THREE


3.0 Icc1212c

3.1 Resistor
3.2 Capacitor
3.3 Condenser Microphone
3.4 Loudspeakers
3.5 Switches
3.6 Communication Cables

Chapter FOUR


4.0 Circuitry Design And Description

4.1 Description Of Power Supply Unit Circuit
4.2 Description Of The Tone Generator Circuit
4.3 Circuit Diagram Of The Three Units And Explanation
4.4 Explanation Of The Switching Circuit

Chapter FIVE


5.0 Construction And Packaging

5.01 Component Sourcing
5.1 Construction And Testing
5.2 Audio Amplifying Stage
5.3 Prototype
5.4 Trouble Shooting
5.5 Packaging

Chapter Six
6.0 Conclusion

6.1 Further Study And Design
Reference
Appendix

Thesis Abstract

An intercommunication system is nothing but the communication between two or more persons not close to one another. This does not mean we should categorize telephones, fax, teleprinters, telegraphs etc. an example of intercom system sine they are used in communication between people. Infact, intercom involves short distance places. It is limited in electronics, offices, and hospitals. The intercom system under is a three way station type. This means that a person can communicate to the other at another station at his own convenient time. They call once another attention by the use of the tone generated by the use of tone generator.Depress a button and the tone sounds, and the same switch is thrown to the intercom circuit thus they communicate.This system to be used in solving the problem of poor communication in our department. Besides, it can be extended to some other offices by the addition this one may use a rotary switch.

Thesis Overview

1.0 INTRODUCTIONElectronic inter communication is the process of exchanging information between individuals over relatively long distance by the use of electronic system connected together by communication cables or the instrument cable or satellite links. A telephone system and an intercom system can be used to achieve intercommunication.In the department of Electrical/Electronics Engineering, Institute of Management and Technology, Enugu, there exists the need for intercommunication between all the offices in the department so as to enable the smooth running of activities. Where by information and ideas are exchanged between the individuals concerned just at the press of a button. To achieve this kind of situation and economical means of electronic communication was considered.Thus the intercom system was chosen so as interconnect the three offices earlier specified. Other offices can also be attached/ connected to the system as time goes on since thee is room for modification. One may ask why the telephone system not considered since it is also another system of intercommunication. The telephone system is equally better but less appropriate since it requires a dedicated line form NITEL who charges bills accordingly. The intercom system only makes use of the physical communication cables interlinking the handsets concerned. Also, the telephone system requires PABX system (Private Automatic Box Exchange) for effective communication between the concerned telephone sets. The PABX is a high capacity telephone switching equipment that automatically connects a call to the desired route or extension number. It equally handles both external call and internal call. The telephone set or system is more appropriate for a whole educational complex or company. It is not appropriate to use the telephone for the connectivity of few offices as this under-utilizes the capacity of the PABX since they are designed to handle high capacity of lines. Bearing cost in mind, the 3-way intercom units is cheaper to construct when compared to the cost of procuring PABX system talkless of design and construction.By embarking on the 3-way intercom, this believed that an efficient communication gadget or communication link between the offices shall be achieved.

Blazingprojects Mobile App

📚 Over 50,000 Research Thesis
📱 100% Offline: No internet needed
📝 Over 98 Departments
🔍 Thesis-to-Journal Publication
🎓 Undergraduate/Postgraduate Thesis
📥 Instant Whatsapp/Email Delivery

Blazingprojects App

Related Research

Electrical electroni. 4 min read

Design and implementation of an energy-efficient smart home system using IoT technol...

The project titled "Design and Implementation of an Energy-Efficient Smart Home System Using IoT Technology" focuses on the development of a cutting-e...

BP
Blazingprojects
Read more →
Electrical electroni. 3 min read

Design and implementation of a smart grid system for efficient energy management...

The project on the "Design and Implementation of a Smart Grid System for Efficient Energy Management" aims to address the growing need for sustainable...

BP
Blazingprojects
Read more →
Electrical electroni. 2 min read

Design and Implementation of a Smart Home Automation System Using Internet of Things...

The project titled "Design and Implementation of a Smart Home Automation System Using Internet of Things (IoT) Technology" aims to explore the integra...

BP
Blazingprojects
Read more →
Electrical electroni. 2 min read

Design and implementation of a smart home energy management system using Internet of...

The project titled "Design and implementation of a smart home energy management system using Internet of Things (IoT) technology" aims to address the ...

BP
Blazingprojects
Read more →
Electrical electroni. 3 min read

Design and implementation of real-time power monitoring system using IoT technology ...

The project titled "Design and Implementation of Real-Time Power Monitoring System Using IoT Technology for Smart Homes" focuses on the development of...

BP
Blazingprojects
Read more →
Electrical electroni. 3 min read

Design and Implementation of Power Factor Correction Circuit for Residential Applica...

The project on "Design and Implementation of Power Factor Correction Circuit for Residential Applications" aims to address the issue of power factor i...

BP
Blazingprojects
Read more →
Electrical electroni. 2 min read

Design and Implementation of a Smart Grid System Using IoT Technology in a Local Pow...

The project "Design and Implementation of a Smart Grid System Using IoT Technology in a Local Power Distribution Network" aims to revolutionize the tr...

BP
Blazingprojects
Read more →
Electrical electroni. 2 min read

Design and Implementation of an IoT-based Home Energy Management System...

The project titled "Design and Implementation of an IoT-based Home Energy Management System" aims to address the growing demand for efficient energy m...

BP
Blazingprojects
Read more →
Electrical electroni. 3 min read

Design and implementation of a smart home system using Internet of Things (IoT) tech...

The project titled "Design and implementation of a smart home system using Internet of Things (IoT) technology" aims to revolutionize the way homes ar...

BP
Blazingprojects
Read more →
WhatsApp Click here to chat with us