Introduction
Literature Review
2.1
Semi Boiled Process
2.2
Full Boiled
2.3
Cold Process
2.4
Different types of soap making oils
2.5
Castor Oil
2.6
Olive Oil
2.7
Neem Oil
3.1
Coconut Oil
Materials and Methods
3.1
Materials Required
3.2
Methodology
3.2.1
Preparation of Soap
3.2.2
Comparing different
properties of soap with detergent
3.2.3
Blending of Oils
3.2.4
Calculation of TFM
3.2.5
Calculation of free alkali
3.2.6
Analysis of the best blend
3.2.7
Saponification Value
3.2.8
Iodine Value
3.2.9
Unsaponifiable Matter
3.2.10
Acid Value
Results and Discussion
4.1
Comparison of soap and detergent
4.2
Properties of soap after blending of oils
4.3
TFM values of soaps
4.4
Analysis of the best blend
4.5
Saponification Values
4.5
Iodine Values
4.6
Unsaponifiable Matter
4.7
Acid Value
Conclusion
Chapter 6
References
List of Tables
Sl.no.
Name of the table
Page
no.
1
Composition of coconut oil
13
2
Yield of soap using individual oils
23
3
Properties of soap versus detergent
23
4
Moisture and Hardness of soap samples from
24
individual oils
5
Yield and pH values of soap samples from blending of
24
oils
6
Lathering and cleansing power of soap samples from
25
blending of oils
7
Moisture and Hardness of soap samples from blending
26
Soaps are the sodium salts or potassium salts of stearic acids or any other fatty acids. They are prepared by the saponification process, which is, reacting the oil which contain triglycerides with caustic soda (NaOH) to give the soap. However different oils have different composition of fatty acids which are responsible for different properties of soaps made out of them. In the present work 5 different types of oils are taken. They are blended in various ratios to prepare 14 different samples of soap. Different properties of these samples were analyzed to see which soap is the best one. The cleansing and lathering properties of all samples were compared. The blend of coconut oil and castor oil at 31 ratio is found out to be the best with 76.8% of TFM and 89.46% of yield. The best blend is analyzed for various properties and they were compared with that given in the literature. The saponification values, iodine values of coconut oil and castor oil were found out and these values were also found for the blend. It was found that the blend was having SAP value of 230.4 and iodine value of 40 which are higher than the individual values. Thus soap prepared using blend of both these oils has better properties than the soaps prepared by individual oils.
📚 Over 50,000 Research Thesis
📱 100% Offline: No internet needed
📝 Over 98 Departments
🔍 Thesis-to-Journal Publication
🎓 Undergraduate/Postgraduate Thesis
📥 Instant Whatsapp/Email Delivery
The project titled "Development of a Novel Process for the Sustainable Production of Biofuels from Algae" aims to address the pressing need for sustai...
The project "Optimization of Biofuel Production from Algae Biomass Using Supercritical Fluid Extraction" aims to explore a sustainable and efficient m...
The project titled "Optimization of Reaction Conditions for Biodiesel Production Using Heterogeneous Catalysts" aims to address the growing demand for...
The project titled "Optimization of a Hydrogen Production Process using Renewable Energy Sources in a Chemical Plant" aims to address the increasing g...
The project titled "Design and Optimization of a Sustainable Process for Biodiesel Production from Waste Cooking Oil" aims to address the significant ...
The project titled "Optimization of Chemical Reactor Design for Sustainable Production Processes" aims to address the critical need for sustainable pr...
The research project, titled "Optimization of Bioreactor Design for Enhanced Production of Biofuels," aims to address the growing demand for sustainab...
The project titled "Optimization of Biogas Production from Food Waste through Anaerobic Digestion" aims to address the pressing need for sustainable w...
The project titled "Design and Optimization of a Chemical Process for Renewable Energy Production" aims to address the growing global demand for susta...