Home / Chemical engineering / Determination the concentration levels of total petroleum hydrocarbons (tph) in soils found in automobile shop

Determination the concentration levels of total petroleum hydrocarbons (tph) in soils found in automobile shop

 

Table Of Contents


Project Abstract

Project Overview

INTRODUCTION

1.1      BACKGROUND OF STUDY

Petroleum hydrocarbons are used generally in our environment as fuel and chemicalcompounds. The uncontrolled release of petroleum hydrocarbons negatively impacts many of our soi1 and water resources. The contamination can result from leaking Underground Storage Tanks (UST), petroleum refineries and bulk storage facilities, broken oil pipelines, spills of petroleum products in chemical plants and transportation processes as well as commercial and industrial uses(automobile workshops)under which this research work falls into. The risks of explosion and fire are also serious threats to the environment.

Total Petroleum Hydrocarbons (TPH) concentration is a global parameter includingmany derived petroleum products, commonly applied to establishtarget soil cleanup levels implemented by several regulatoryagencies (Presidency Ministry, 2005; VROM, 2012; Weisman, 1998).The Standard ISO 16703 (ISO,2004) is an internationally acceptedmethod to obtain TPHconcentrations from C10 to C40, althoughthere are other standards currently in use (Rosano-HernΓ‘ndez et al., 2012).

The Environmental Protection Agency (EPA) has reported that due to the uncontrolled release of petroleum hydrocarbons into the environment, there has been a considerable amount of contamination in soil and groundwater. As reported by Gruiz and Kriston (1995) an amount of 6,000,000 tons petroleum waste enters into the environment each year causing serious environmental problems.

Even if the problems associated with fuel storage and distribution are solved, contamination incidental to production and commercial usage would continue to threaten groundwater supplies. Many manufacturing processes necessarily produce water and sludge that are contaminated with hydrocarbons.

High concentration levels of hydrocarbons present in contaminated sites could pose a health risk to humans, plants and animal lives. In recent years, the release of hazardous and toxic substances into the soil, water, sediment and air in Niger Delta, Nigeria has been a widespread problem. The economy of Nigeria, the most populous, black African country is largely dependent on crude oil tapped from the Niger Deltaregion. Niger Delta has a population of about 30 million and an estimated 2.8 million barrels of crude oil per day come from this region.

STATEMENT OF PROBLEM

In evaluating the relevance of pollution cleanup standards, thereare many things that must be considered. Risk factors such as fate, transport, and toxicity of constituents, and monetary factors such as expected cost of remediation are but just afew of the considerations that must be addressed in such an endeavor.This hypothesis evaluates, from a risk and cost perspective, the use of TPH as a cleanupstandard for remediation of petroleum contaminated soils and compares the use of a TPHstandard to a compound specific standard. This thesis also analyzes sampling and analysisData contained in the Installation Restoration Program Information Management System(IRPIMS) database to evaluate the use of the compounds upon which current statestandards are based.

1.3  SCOPE OF THE STUDY

The scope of this study covers the sampling exercise, field study, a laboratory analysis of samples obtained and interpretation of laboratory data using statistical, graphical illustration. The field study was carried out in Warri Metropolis (Warri, Effurun, Ughelli and Udu), Delta State. Soil samples were collected at different points in the workshops (main workshop and 10metres away from the main workshop).

1.4  OBJECTIVES OF STUDY

The aim of this study is to determine the concentration levels of total petroleum hydrocarbons (TPH) in soils found in automobile shop (keke, car, bikes, and truck workshops).

Objectives:

  • The objective of this work is to ascertain the level of TPHin analyzed samples.
  • To determine the concentration of TPHin the selected locations ofWarri Metropolis (Warri, Effurun, Ughelli and Udu).
  • To evaluate the impact of TPH on soil consequently, the risk posed to public health as a result of the identified pollution.

Blazingprojects Mobile App

πŸ“š Over 50,000 Project Materials
πŸ“± 100% Offline: No internet needed
πŸ“ Over 98 Departments
πŸ” Software coding and Machine construction
πŸŽ“ Postgraduate/Undergraduate Research works
πŸ“₯ Instant Whatsapp/Email Delivery

Blazingprojects App

Related Research

Chemical engineering. 4 min read

Design and Optimization of a Chemical Process for Sustainable Production of Biofuels...

The project "Design and Optimization of a Chemical Process for Sustainable Production of Biofuels" focuses on developing an efficient and environmenta...

BP
Blazingprojects
Read more β†’
Chemical engineering. 4 min read

Optimization of Biofuel Production from Algae...

The project on "Optimization of Biofuel Production from Algae" focuses on exploring innovative strategies to maximize the efficiency of biofuel produc...

BP
Blazingprojects
Read more β†’
Chemical engineering. 3 min read

Design and Optimization of a Novel Chemical Process for Sustainable Energy Productio...

The project topic "Design and Optimization of a Novel Chemical Process for Sustainable Energy Production" focuses on the development of an innovative ...

BP
Blazingprojects
Read more β†’
Chemical engineering. 2 min read

Design and Optimization of a Bioreactor for Production of Biofuels...

The project topic "Design and Optimization of a Bioreactor for Production of Biofuels" focuses on the development of an innovative system for the prod...

BP
Blazingprojects
Read more β†’
Chemical engineering. 2 min read

Optimization of Bioreactor Design for Production of Bioethanol from Agricultural Was...

The project on "Optimization of Bioreactor Design for Production of Bioethanol from Agricultural Waste" aims to address the growing need for sustainab...

BP
Blazingprojects
Read more β†’
Chemical engineering. 4 min read

Optimization of Biogas Production from Food Waste through Anaerobic Digestion...

The project topic "Optimization of Biogas Production from Food Waste through Anaerobic Digestion" focuses on the sustainable conversion of food waste ...

BP
Blazingprojects
Read more β†’
Chemical engineering. 4 min read

Optimization of Biodiesel Production Using Microalgae as Feedstock...

The project topic, "Optimization of Biodiesel Production Using Microalgae as Feedstock," focuses on the sustainable production of biodiesel, a renewab...

BP
Blazingprojects
Read more β†’
Chemical engineering. 2 min read

Optimization of Waste Water Treatment Processes using Advanced Chemical Engineering ...

The project topic "Optimization of Waste Water Treatment Processes using Advanced Chemical Engineering Techniques" focuses on enhancing the efficiency...

BP
Blazingprojects
Read more β†’
Chemical engineering. 2 min read

Design and Optimization of a Sustainable Process for Bioethanol Production from Agri...

The project topic "Design and Optimization of a Sustainable Process for Bioethanol Production from Agricultural Waste" focuses on the development of a...

BP
Blazingprojects
Read more β†’
WhatsApp Click here to chat with us