Home / Chemical engineering / Assessment of carbon monoxide (co) level

Assessment of carbon monoxide (co) level

 

Table Of Contents


Project Abstract

Air pollutions pollutant showed that the extent of spreading depends on the motor vehicle traffic population of the area. This pollution strongly generated through combustion of fossil fuels presents difficult environmental challenge to societies as it could degrade the environment and affect human health and quality of life. Vehicular emissions are major contributors to air pollution in urban areas as they contain harmful gases. The levels of carbon monoxide has been investigated in two locations of Enugu metropolis (high traffic Γ’old parkΓ’ and low traffic β€žcaritas universityΓ’), in order to determine its pollution status with regards to air. EL-USB-CO analyzer used for the analysis indicated variations in the levels of CO for the period of study. The results obtained revealed that the concentrations of CO in high traffic (HT) area is higher than that of low traffic (LT) and is unacceptable compared with the Federal Environmental Protection agency (FEPA) Nigeria set limit. The dispersion pattern of the suggests that vehicular emission contributes to the levels of carbon monoxide in the environment.

Project Overview

1.0                     INTRODUCTION
Air pollution is associated with increasing cases of many adverse health effects, e.g. mortality, respiratory diseases and cancer. The chemical composition of ambient air is very complex and depends on many different factors, traffic generated air pollution being a major source in large cities. This is especially true in the developing world, mainly due to the high proportion of old, poorly maintained vehicles, the abundance of two stroke vehicles and the poor fuel quality (Baumbach et al., 1995; Gwilliam 2003). All these factors contribute to one of the major air pollutant in urban areas; carbon monoxide (CO).
CO is a poisonous, colorless, inevitable gas that has neither taste nor smell. It is formed when carbon burns with too little air (incomplete combustion) (Smith and Scott, 2002). Carbon monoxide (CO), also called Carbonious oxide or Carbon (II) Oxide and is slightly lighter than air. CO is a deadly, colorless, odorless, poisonous gas, produced by the incomplete burning of various fuels, including coal, wood, charcoal, oil, kerosene, propane, and natural gas. Products and equipments and machines powered by internal combustion engines such as portable generators, cars, lawn mowers, and power washers also produce CO. It has a high affinity for hemoglobin in blood and displaces O2 to form carboxyl hemoglobin (COHb). This can cause dizziness, headaches and eventually death.



Blazingprojects Mobile App

πŸ“š Over 50,000 Project Materials
πŸ“± 100% Offline: No internet needed
πŸ“ Over 98 Departments
πŸ” Software coding and Machine construction
πŸŽ“ Postgraduate/Undergraduate Research works
πŸ“₯ Instant Whatsapp/Email Delivery

Blazingprojects App

Related Research

Chemical engineering. 3 min read

Design and Optimization of a Chemical Process for Sustainable Production of Biofuels...

The project "Design and Optimization of a Chemical Process for Sustainable Production of Biofuels" focuses on developing an efficient and environmenta...

BP
Blazingprojects
Read more β†’
Chemical engineering. 4 min read

Optimization of Biofuel Production from Algae...

The project on "Optimization of Biofuel Production from Algae" focuses on exploring innovative strategies to maximize the efficiency of biofuel produc...

BP
Blazingprojects
Read more β†’
Chemical engineering. 3 min read

Design and Optimization of a Novel Chemical Process for Sustainable Energy Productio...

The project topic "Design and Optimization of a Novel Chemical Process for Sustainable Energy Production" focuses on the development of an innovative ...

BP
Blazingprojects
Read more β†’
Chemical engineering. 2 min read

Design and Optimization of a Bioreactor for Production of Biofuels...

The project topic "Design and Optimization of a Bioreactor for Production of Biofuels" focuses on the development of an innovative system for the prod...

BP
Blazingprojects
Read more β†’
Chemical engineering. 3 min read

Optimization of Bioreactor Design for Production of Bioethanol from Agricultural Was...

The project on "Optimization of Bioreactor Design for Production of Bioethanol from Agricultural Waste" aims to address the growing need for sustainab...

BP
Blazingprojects
Read more β†’
Chemical engineering. 3 min read

Optimization of Biogas Production from Food Waste through Anaerobic Digestion...

The project topic "Optimization of Biogas Production from Food Waste through Anaerobic Digestion" focuses on the sustainable conversion of food waste ...

BP
Blazingprojects
Read more β†’
Chemical engineering. 3 min read

Optimization of Biodiesel Production Using Microalgae as Feedstock...

The project topic, "Optimization of Biodiesel Production Using Microalgae as Feedstock," focuses on the sustainable production of biodiesel, a renewab...

BP
Blazingprojects
Read more β†’
Chemical engineering. 4 min read

Optimization of Waste Water Treatment Processes using Advanced Chemical Engineering ...

The project topic "Optimization of Waste Water Treatment Processes using Advanced Chemical Engineering Techniques" focuses on enhancing the efficiency...

BP
Blazingprojects
Read more β†’
Chemical engineering. 3 min read

Design and Optimization of a Sustainable Process for Bioethanol Production from Agri...

The project topic "Design and Optimization of a Sustainable Process for Bioethanol Production from Agricultural Waste" focuses on the development of a...

BP
Blazingprojects
Read more β†’
WhatsApp Click here to chat with us